Sale!

The MEGA curriculum Fusion 360 bundle – over 280 resources

£233.99

Don’t miss out! Just 9 left at this price.

Claim your discount before the offer runs out!

The full curriculum includes every single lesson pack. The Beginners, Intermediate, Advanced and Expert lessons. This totals over 280 pre planned resources ready to use in the classroom. As part of the purchase you download the files to use. This is suitable for teaching with any type of filament 3D printer and SLA/DLP 3D printer.

This Mega Bundle includes every lesson;

  • Lesson 1 – An Introduction to 3D Printing
  • Lesson 2 – The 3D Printing process
  • Lesson 3 – Create a model to 3D Print
  • Lesson 4 – Developing modelling skills
  • Lesson 5 – 3D Printing Design challenge
  • Lesson 6 – Basic materials and slicing
  • Lesson 7 – End of course test
  • Lesson 8 – 3D Printing in our society
  • Lesson 9 – Different types of 3D Printers
  • Lesson 10 – Introduction to parametric 3D modelling
  • Lesson 11 – Developing CAD skills
  • Lesson 12 – Intermediate Design Challenge
  • Lesson 13 – Intermediate slicing and materials
  • Lesson 14 – Customised slicing
  • Lesson 15 – End of course assessment
  • Lesson 16 – 3D printing and manufacturing
  • Lesson 17 – Sustainability and 3D printing
  • Lesson 18 – Advanced parametric CAD modelling skills
  • Lesson 19 – Advanced Design skills – Model a smart phone case
  • Lesson 20 – Advanced Design challenge
  • Lesson 21 – Advanced assessment
  • Lesson 22 – An introduction to Resin 3D printing
  • Lesson 23 – SLA V DLP and the study of resin materials
  • Lesson 24 – Slicing files for resin 3D printing and STL optimisation
  • Lesson 25 – Resin jewellery tutorials – ring design (4 tutorials)
  • Lesson 26 – Resin jewellery tutorials – ear rings (4 tutorials)
  • Lesson 27 – Resin jewellery tutorials – necklaces (4 tutorials)
  • Lesson 28 – Expert assessment of resin 3D printing

If you want to hit the ground running with 3D printing then this lesson pack bundle includes everything.  That’s 280 resources ready to use (all based on Fusion 360) in the classroom. If you want to introduce 3D printing lessons across all ages in your school then this lesson pack will do that.

  • Beginners lessons can be used for children ages 10 – 12 TinkerCAD.
  • Intermediate lessons can be used for 12 – 14 Fusion 360
  • Advanced lessons can be used for 14 – 16 Fusion 360
  • Expert lessons can be used for 16 + Fusion 360

Depending on the ability of your specific classes, these recommended ages are flexible.

After purchase, please allow about 10 minutes to download all the lessons.

 

FLASH sale!
35% off Full and Mega Curriculum.
Includes free place on
3D printing bootcamp course
x